Skip to content
LatestTopicsCompaniesFundingGlossaryAbout

ByteDance-backed DH-Robotics starts A-share IPO tutoring; its humanoid factory jobs run on grippers

Gripper and robot-hand maker DH-Robotics registered for IPO tutoring with the Shenzhen securities regulator, disclosed Nov. 13. Its listing story is the five-finger hand; the humanoid factory work it can point to uses its grippers.

Robrief Newsroom
1 min readSources verified
Share

DH-Robotics, the Chinese maker of electric grippers and robot hands, has registered for IPO tutoring with the China Securities Regulatory Commission's Shenzhen bureau, the first step toward an A-share listing. The CSRC disclosed the filing on Nov. 13; Guotai Haitong Securities is the tutor, under an agreement signed Nov. 5, the 21st Century Business Herald reported. ByteDance invested in 2022, and IDG Capital, Qiming Venture Partners and Legend Capital joined later rounds.

The pitch is the hand. The business is the gripper. DH-Robotics' flagship dexterous hand, the ADH-5-13, has 13 directly driven degrees of freedom, but the two humanoid production jobs it can name both use grippers. At BMW's Leipzig plant, its AG-series grippers sit on Hexagon's AEON humanoid for battery assembly and parts manufacturing. At Longcheer's plant in Nanchang, AgiBot's wheeled humanoid uses its PGC grippers for quality inspection, at a task success rate of 99.99%, the company says.

That base is large. The company says it has shipped more than 300,000 sets to over 5,000 customers since its founding in 2016. Founder Sun Jie holds 12.64% directly and controls the votes on another 14.41% through four employee platforms. The Herald expects near-term results to rest on that traditional automation business; the tutoring period is when the hand has to start adding to it.

Sources Sources verified

  1. 1.21st Century Business Herald, Nov 14, 2026: 字节押注的“机器人之手”启动A股上市辅导m.21jingji.com
  2. 2.Beike Caijing via 21jingji, Nov 14, 2026: 大寰机器人启动上市辅导,字节跳动曾参投m.21jingji.com

Share this briefing

Know someone who follows robotics? Send it their way.

AGILINK's OmniHand ran a 72-step test station in 8.5 minutes, 30 seconds behind a skilled worker

AGILINK, the dexterous-hand maker spun out of AgiBot, says an OmniHand ran 72 steps of end-of-line testing at a Shaoxing plant with a 98% success rate, 30 seconds slower than a skilled worker, and launched a data glove with 746 touch points. Speed is no longer the argument against hands on the line; the job it proved it on was testing AGILINK's own hands.

2 min readSources verified

Newsletter

Robrief Weekly

One email a week with the robotics news that matters. Free, unsubscribe anytime.