SANY puts seven AI welding robots on a crane-boom line, and one welder now runs two
SANY Heavy Industry has seven Rootcloud welding robots that adjust their own welds working on crane booms near Changsha, Xinhua reported, and one worker now tends two of them. The gain is a staffing ratio. How far it spreads depends on how fast SANY can record veteran welders on new parts.
SANY Heavy Industry has seven AI welding robots in production on the crane-boom line at its Ningxiang industrial park in Changsha, Xinhua reported on Nov. 14. On SANY's old setup, each welder watched one robot and steered it with a handheld remote. Now the robots sense the seam and correct themselves mid-weld. The workers mostly load and unload parts, and one of them can run two robots. Duan Yuanwei, deputy head of SANY's process institute, told Xinhua the line will pass about 100,000 meters of cumulative weld by the end of the year. Rootcloud built the robots, and SANY uses them across its divisions.
So far the payoff is a staffing ratio, not an empty workshop. SANY's veteran welders have become the robots' trainers, and that is where the limit on scale sits. Getting to seven robots took about a year and a half of training sessions with those welders.
Old welders were the dataset
A crane boom is built from ultra-high-strength steel plate tens of millimeters thick, joined with weld after weld in layers, and Duan said any small flaw puts the whole crane at risk. He splits welding into five steps: identify, calculate, execute, judge and give feedback. A conventional robot only executes. SANY wanted its robots to identify and calculate too, so they read the seam through the glare of the arc and change torch motion and speed the way a skilled welder would.
Newsletter
Robrief Weekly
One email a week with the robotics news that matters. Free, unsubscribe anytime.
To teach them, experienced welders welded test plates while a data-capture system SANY built itself recorded their hand technique. Engineers then labeled and scored each plate for model training, senior welding engineer Li Lin said. The robots also learn from nearly ten years of SANY's own welding data. SANY says the share of booms that pass flaw inspection on the first try has risen "significantly," but it gave Xinhua no figure.
The approach has been a while coming. In September 2025, Rootcloud's chief AI scientist Sun Baigui told Xinhua the company was moving from planning a weld before the arc strikes to adjusting it during the weld, using embodied AI. A first version was then only in expanding trials. Xinhua cited one research firm's estimate at the time that fixed welding robots can handle just 30% of welding jobs.
Path sells the same idea for $2.45 billion
Four days earlier, Path Robotics of Ohio raised $300 million at a $2.45 billion valuation to sell AI welding to manufacturers. Its chief executive, Andy Lonsberry, calls welding "one of the hardest jobs on the factory floor to automate." SANY gets its version from Rootcloud and its training data from its own staff. The next thing to watch is how quickly the method moves from crane booms to other parts, which SANY expects.
Sources Sources verified
- 1.Xinhua via 21jingji, Nov 14, 2026: 三一重工:智能焊接机器人上岗 工厂加速智能跃迁21jingji.com
- 2.Xinhua via Sina Finance, Nov 14, 2026: 三一重工:智能焊接机器人上岗 工厂加速智能跃迁finance.sina.com.cn
- 3.Path Robotics, Nov 10, 2026: Path Robotics Announces $300 Million Series E Financing at $2.45 Billion Valuation to Scale Physical AI for Manufacturingpath-robotics.com
- 4.Xinhua, Sep 19, 2025: 从“互联”到“智能” 树根科技阔步走向工业智能news.cn
- #SANY
- #Rootcloud
- #welding
- #cranes
- #heavy machinery
- #China
- #embodied AI
Share this briefing
Know someone who follows robotics? Send it their way.
Related briefings
More in Industrial RobotsAptiv will host hundreds of TARS and Shanghai Electric robots in its plants and sell both makers its robot compute
Aptiv signed agreements at the CIIE in Shanghai to bring hundreds of embodied robots from TARS and Shanghai Electric into its production lines, with Aptiv's computing platform and power management going into both partners' robots first. The car-parts supplier is buying robot trials and selling robot parts in the same deal.
CNPC's Kunlun takes 60% of a new industrial robot venture with Unitree, which gets 20%
A CNPC equipment unit and its investment arm plan to own 60% of a new venture for industrial embodied-AI robot solutions, with Unitree and Beijing AI-model startup Fanjie Intelligence at 20% each, a Beijing merger notice shows. The oil group, the customer, holds the majority.
AgiBot launches Genie G2 Max with 20 kg per arm and 50 kg peak
AgiBot launched the Genie G2 Max on Oct 26, 2026, rated at 20 kg per arm, 40 kg with both arms and 50 kg peak. AgiBot says it already depalletizes in JD Logistics' Zhilang warehouse and moves joint parts on the Qiyuan T1 production line.
Newsletter
Robrief Weekly
One email a week with the robotics news that matters. Free, unsubscribe anytime.